NESS D8x PANEL & NOISE KIT (LCD KEYPAD)

• Flexible 8 Zone control panel & Dialler.
• The Ness D8x is the most versatile Ness 8 zone control panel ever!
• The D8x is available in Led keypad or LCD keypad models to suit any preference.supplied with keypad, plug pack, battery, telephone lead, housing and manuals.
  
  
• Panel & Siren Kits include the control panel complete with keypad, plugpack, battery, plus external horn speaker, siren cover, strobe light and internal screamer.
• Choose your detectors from the Ness Quantum range.
• Easy and convenient to order control panel and sirenkits.
• Pre-packed for shipping.

FEATURES:

• 8 Zones + Tamper
• Onboard 3 Door Access Controller
• Auto-Time Control via onboard Real-Time Clock
• Optional Radio Interface for integrated wireless security
• Onboard Vibration Sensor Analyser
• Multiple programmable EOL resistor values from 0k to 22k
• 4 programmable auxiliary outputs
• Direct Connect or Dial-up programming via NessComms™
• Contact ID and VOICE reporting dialler
• Remote control of outputs via telephone
• Up to 56 User Codes (PIN, RADIO KEY or PROX CARD)

SPECIFICATIONS:

• Box dimensions: 235w x 300h x 90d mm.
  
• Plug pack 240V Ac, output 17V Ac@1.4A.
  
• Power supply 13.8V Dc @ 800mA.
  
• Quiescent current draw 80mA with 1 keypad.
  
• Operating voltage 9.5V– 14V Dc.
  
• Rechargeable battery 12 volt 7.0 Amp/hour sealed lead Acid.
  
• Battery charging current 350mA maximum, current limited.
  
• Dynamic battery test backup battery is tested under load, hourly and on arming.
  
• Fuses:

1. 2 Amp auto resetting / siren output & reset output.
   
2. 500mA auto resetting / 12 volt auxiliary outputs.
   
3. 200 mA auto resetting / strobe output.
   

• Zone inputs: 8 2 x 24hr tamper inputs.
  
• End of line resistor choice of 12 programmable values including N/c. Default 2200 Ohms (2.2k)
  
• Maximum keypads: 3.
  
• Radio Header multi-pin connector for the Ness radio Interface.
  
• Serial Header serial data port for direct connect programming using Nesscomms™ software. Also 2 way serial data (V5.6+)
  
• Reader Header: multi-pin port for connecting up to 3 Ness proximity access card readers via 106-012 Weigand Interface.
  
• Siren output: on board siren driver with timed output maximum 3 x 8 Ohm horn speakers.
  
• Strobe output: 12V Dc timed output. maximum 2 x 1 Wattstrobe lights.
  
• Reset output: 12V Dc timed output. max. 3 x 12V piezo screamers.
  
• Equipment power output: 13.8V Dc output for powering detectors and other equip-ment. maximum 500mA.
  
• AuX Header: multi-pin connector provides outputs Aux1,Aux2, Aux3, Aux4, 12V Dc.