
DEA7WL2 is a compact wireless entry alarm system which is easy to install in both indoor and outdoor. It is designed for both residential and commercial using such as garage door, shops, warehouse restaurants and farm etc. to alert you to the entry of customers and visitors. The system consists of a send/receive unit which transmits an IR beam across the doorway onto a prismatic reflector mounted on theopposite side. The beam is reflected back to the receiver tocomplete the circuit. When a person walks through the beam, the circuit is interrupted and this causes the alarm to sound an audible warning. The warning buzzer can be mounted in any suitable location.
Photoelectric Beam Sensor | |
Type |
Infrared Receiver Modules for Remote Control Systems
|
Housing | ABS |
Radio Frequency | 433.92 MHz |
LED Emitting Element | Infrared LED Indicator (Red) |
Sensing Range | 0.5 ~ 7 meters |
Power Supply | Switching mode power supply for sensor and speaker |
Current Drain (mA) | Standby (Beam Aligned properly): 3.7 mA/Beam Broken:14 mA |
Power input wire | DC Jack (f)5.5mm/2.1mm x (L)12cm |
Wireless Door Announcer | |
Type | Microprocessor based control unit |
Housing | ABS |
Radio Frequency | 433.92MHz |
Wireless Coverage Range | ≤100m (Open space) |
Volume of Speaker | 0 ~ Max (Adjustable) |
Chime/Alarm Time | 30 sec max. (Adjustable) |
Power Supply (Input) | AC / DC Adaptor (100-240VAC/50-60Hz) |
Power input Jack | DC Jack (f)5.5mm/2.1mm |
Power Supply (Output) | 12VDC/130 mA |
Power output Jack | Phone Jack (f)3.5mm |
Temperature | 0°C ~ 50°C |
4 Digits Counter (Optional) | |
Type | 4 Digits Counter (Number can be adjusted +/-/Reset) |
Housing | ABS |
Power Supply | 12VDC/ 130mA (same power source as speaker) |
Power input wire | Phone Plug (f)3.5mm |